Pad printing machines with shuttle tables can only print one product at a time, and the printing efficiency is low. The initial shuttle table was controlled by the cylinder , switching back and forth between different printing positions, and the accuracy was not high. As users have higher requirements for product printing quality, shuttle tables are increasingly controlled by servo motors. The shuttle controlled by servo motors The docking position can also be set at will.
Many products have complex shapes and require different graphics and text to be printed on different parts. Some require the same color, and some require different colors. If servo fixture is installed on the workbench that can perform three-dimensional movements - (left and right, up and down, rotation movements), a shuttle pad printing machine will be able to meet the requirements and minimize the purchase cost.
Shuttle pad printing machines with this structure usually execute instructions by a variable program controller, and set different parameters according to the printing requirements of the product, so that 6 prints of the same color or different colors can be printed on different parts of a product.
Six colors Independent-press pad printer with servo shuttle//Structure
Feeding
Manual
Working table
Servo Shuttle-type working table
Shuttle stroke
125mm
Ink supply system
Closed -type system
Plate type and size
10mm Thick steel plate. Size ：100*250mm.
Pad dropping control
independent pressing cylinder, Automatic rubber pad clean device
Ink drying
Heat air
Blanking
Manual
Six colors closed cup pad printer with servo shuttle and pad clean device//Usage and characters
Guide
Rubber pad controlled by independent cylinder when printing and dipping ink, suitable for printing large size but small logo；
Print both one color and four colors with servo shuttle worktable， Overprint is more precision.
With sealed cup to protect environment ， VOC volatilization reduced 86% and save ink over 25%.
With coin aluminum structure ensure more stabilization and long life.
Independent cylinder to drive sealed cup ensure removing ink completely. Make min Pressure to remove ink and prolong the life of sealed cup and steel plate;
Both thick steel plates and thin steel plates installed , Choose according to customer requirements.
Automatic rubber pad chean device, ensure printing quality .
Widely used in the industry field of cosmetics case, electron parts, Toys, plastics production, Housewares, gifts, decorations.
Completely printing solution including ink and thinner , fixtures, steel plates, rubber pads provided when you send us samples;
Application︰
Pad printing machines with shuttle tables can only print one product at a time, and the printing efficiency is low. The initial shuttle table was controlled by the cylinder , switching back and forth between different printing positions, and the accuracy was not high. As users have higher requirements for product printing quality, shuttle tables are increasingly controlled by servo motors. The shuttle controlled by servo motors The docking position can also be set at will. Many products have complex shapes and require different graphics and text to be printed on different parts. Some require the same color, and some require different colors. If servo fixture is installed on the workbench that can perform three-dimensional movements - (left and right, up and down, rotation movements), a shuttle pad printing machine will be able to meet the requirements and minimize the purchase cost. Shuttle pad printing machines with this structure usually execute instructions by a variable program controller, and set different parameters according to the printing requirements of the product, so that 6 prints of the same color or different colors can be printed on different parts of a product.
