Notebook Manual Hot stamping machine

1. Applicable material characteristics and hot stamping points

• Leather:

• Characteristics: Leather is flexible and elastic, with a variety of surface textures. Natural leather such as cowhide and sheepskin has a tough texture, while artificial leather is relatively smooth.

• Hot stamping points: When hot stamping, the pressure needs to be adjusted according to the thickness and flexibility of the leather. For thicker leather, sufficient pressure should be applied to ensure that the hot stamping pattern is fully transferred, but not too much to avoid damaging the leather texture. Temperature control is also critical, generally around 100-140℃, to prevent the leather from deforming or hardening due to high temperature. For example, when making high-end leather bags, if you want to stamp the brand logo on the surface of the bag, you need to accurately control the pressure and temperature so that the hot stamping pattern is clear, firm and does not affect the leather texture.

• Paper:

• Characteristics: There are many types of paper, including cardboard, coated paper, kraft paper, etc., and their thickness, texture and water absorption vary. Cardboard is thicker and harder, coated paper has a smooth surface and poor water absorption, and kraft paper is relatively rough.

• Key points for hot stamping: For thin paper, such as ordinary writing paper, the hot stamping pressure should be light to avoid paper cracking, and the temperature can be controlled at 80-120℃. For thick cardboard, the pressure can be increased appropriately and the temperature can be slightly higher to ensure that the hot stamping pattern can be firmly attached to the surface of the paper. When making products such as greeting cards and book covers, the hot stamping parameters should be adjusted according to the specific type of paper so that the hot stamping pattern has good gloss and adhesion.

• Wood:

• Characteristics: There are different types of wood, such as pine, oak, mahogany, etc., and their density, hardness and surface smoothness vary greatly. Hardwood with high density has a smooth surface, while softwood may be rough.

• Key points for hot stamping: Due to the high hardness of wood, hot stamping requires greater pressure, and the temperature is generally set at 120-160℃. At the same time, the wood surface may need to be pre-treated by grinding to make it smoother and smoother to achieve better hot stamping effect. For example, when hot stamping wooden crafts and furniture decorative parts, the wood surface must be properly treated first to ensure the clarity and firmness of the hot stamping pattern.

2. Structure and working principle of manual flat embossing hot stamping machine

• Structure:

• Body: Usually composed of a sturdy metal frame, which provides stable support for the entire hot stamping process. The body design is simple and easy to operate and maintain.

• Heating plate and hot stamping plate: The heating plate is used to provide the heat required for hot stamping, and there are heating elements such as electric heating wires inside. The hot stamping plate is installed under the heating plate, with a flat surface, and is engraved or made according to the hot stamping pattern.

• Pressure device: Generally a manually operated lever or screw mechanism. The operator manually presses down the lever or rotates the screw device to transfer the pressure to the hot stamping plate, so that the hot stamping plate is in close contact with the workpiece.

• Workbench: A platform for placing leather, paper, wood and other workpieces waiting for hot stamping. The surface is flat and smooth, and there is usually a positioning device to help the operator accurately place the workpiece.

• Working principle: Place the hot stamping foil on the surface of the workpiece (leather, paper or wood), and then place the workpiece on the workbench. By manually operating the pressure device, the hot stamping plate is lowered and in close contact with the workpiece. The heat provided by the heating plate melts the hot melt adhesive on the hot stamping foil. Under the action of pressure, the metal layer or pigment layer on the hot stamping foil is transferred to the surface of the workpiece to complete the hot stamping. At the same time, if the hot stamping plate has an indentation pattern, an indentation effect can also be formed on the surface of the workpiece.

3. Operation precautions and tips

• Preparation: Before hot stamping, make sure that the surface of the workpiece is clean and flat. For wood, proper polishing should be carried out; for leather, dust and oil should be removed from the surface; for paper, it should be flat and wrinkle-free.

• Parameter adjustment: According to the characteristics of different materials, as mentioned above, reasonably adjust the hot stamping pressure, temperature and hot stamping time. When hot stamping starts, you can test it on a small piece of material first, and then perform batch operations after finding the best parameters.

• Hot stamping process: When manually operating the pressure device, apply force evenly to make the hot stamping plate fully contact the workpiece to avoid uneven local pressure that may lead to incomplete hot stamping patterns or uneven indentations. Hot stamping time generally depends on the complexity of the material and the hot stamping pattern, usually between a few seconds and more than ten seconds.

• Post-hot stamping inspection and maintenance: After hot stamping is completed, check the quality of the hot stamping pattern, such as whether it is complete and clear, whether the color is uniform, whether the indentation meets the requirements, etc. For hot stamping machines, regularly clean the residue on the surface of the heating plate and hot stamping plate, and check whether the heating element and pressure device are working properly.