Most of the plastic cups have a certain taper. The curved length of the large end and small end of the rotation process is different, and the speed is also different. When used for transposition, the transfer film will wrinkle. In order to avoid wrinkles, there are two main measures: one is to make a fan -shaped transfer film according to the shape of the cup; the other is to use the fertilizer heat transferor controlled by servo, and the thermal transfer film of the conical transferor to transport the film conveyor. The device can be rotated according to the taper of the cup, turning different angles, and transferring the transfer film to the cup. The servo system of the taper thermal transfer machine must ensure that the speed at the contact of the silicone roller and the cup bus is equal, otherwise the phenomenon of wrinkles will still occur.
H-100MT Cone-Cup heat transfer Machine //Structure
Working table
Sector-orbit working table ;
Stamping Head drive
Pneumatic drive
Foil collecting method
Automatically film collecting along sector orbit
Press adjustment
Up-down of stamping head
Temperature control
Heating tube heat up，Automatically temperature controlling, temperature free setting
Stamping roller size
Width: 200mm, diameter: 125mm.
H-100MT Cone-cup heat transfer machine //Usage and characters
Guide
H-100MT is developed specifically for high-precision the Cone plastic cup transfer heat transfer machine.
Products suitable for cylindrical products, thermal transfer process;
Everyday household items, household appliances, toys, plastic gifts, etc. essential thermal transfer machines.
Hydraulic structure design, the transfer process more stable, the pressure more evenly;
Heat transfer machine can be used thermal transfer film, hot stamping foil can also be used by the necessary transformation, heat transfer machine can be installed copperplate roller to achieve the stamping process;
The trip around the table to dynamically adjust for different length transfer products;
Roller width 350mm;
For some of diameter greater than 230mm, 350mm height roughly around a large plastic bucket, the more difficult transfer. However, compared to silk screen decoration, transfer still has a very distinct advantage, but this time reduce the cost of transfer;
You can use the paint bucket to transfer automatically roll of thermal transfer machines, you can also use the manual release paper thermal transfer machines. As the transfer is completed once, compared with a screen printing to a print, process is relatively simple.
Application fields
Plastics thermal transfer;
Woodware thermal transfer machine，stamping,
Plastics Bronzing ，Glass and metal Heat transfer;
All kinds of Round and irregular container cap, lid; cosmetic lids.
H-100MT Cone-cup heat transfer Machine //Parameter
Technical parameters
Length of Rubber Roller: 200mm;
Max pressure:2000 Kg;
Up-and down distance: 160 mm;
Heat wattage: 3000 W;
Foil feed: Motor Drive;
Temperature range: 0 - 400oC;
Net Weight :586 Kg;
Outer dimension:1500 x 730 x 2000 mm;
Max stamping diameter: 180mm.
Works supply
3 Phase 380V Power supply.
Package list
Package dimension:1.82×1.310×1.83m
Gross weight: 239KG;
CBM:3.19176
H.S.Code
8443198000
Certificate
CE
H-100MT Cone-cup heat transfer machine //Advantage
Function
The program controller, easy to operate;
Uniform heat transfer, plastic roller rotation, suitable for cylinder heat transfer can be achieved by installing a different fixture;
High-precision photoelectric cell tracking control for easy positioning thermal transfer;
Non-location requirements of stamping using a timed feeder by the length of the rolls can be flexibly adjusted;
Adjustable worktable, easy to transfer the workpieces of different lengths;
The transfer pressure, temperature, speed can be based on different material for the flexible adjustment;
The height adjustable stamping head movements can fine-tune, easy to adjust the height of the different products;
Precise temperature control system, temperature error control in less than 3 degrees; silicone roll radiant heating, thermal efficiency of the utilization factor;
Rubber roller embossing pressure control system, constant pressure of the transfer process, the transfer effect is more perfect;
Bench design of the patented floating bodies, in accordance with the outline of the product line floating in the transfer process to maintain the Cots thermal transfer film or foil paper is closely attached to the surface of the product, and profiling Hot Stamping and Heat Transfer
Application︰
Most of the plastic cups have a certain taper. The curved length of the large end and small end of the rotation process is different, and the speed is also different. When used for transposition, the transfer film will wrinkle. In order to avoid wrinkles, there are two main measures: one is to make a fan -shaped transfer film according to the shape of the cup; the other is to use the fertilizer heat transfer controlled by servo, and the thermal transfer film of the conical transfer to transport the film conveyor. The device can be rotated according to the taper of the cup, turning different angles, and transferring the transfer film to the cup. The servo system of the taper thermal transfer machine must ensure that the speed at the contact of the silicone roller and the cup bus is equal, otherwise the phenomenon of wrinkles will still occur.
