Product Description

1. Manual in and out of the workbench

• Structural features: The workbench of this hot stamping machine is designed for manual in and out, usually through guide rails and handles. The workbench is installed on a linear guide rail with high precision to ensure the stability of its in and out process. The operator holds the handle and pushes the workbench in and out of the hot stamping area. This manual operation method has a simple structure and relatively low cost.

• Operational advantages and limitations: Manual in and out of the workbench allows the operator to flexibly control the position of the workbench according to actual conditions, especially when placing or adjusting hot stamping workpieces. For example, when hot stamping some irregularly shaped or large-sized items, the operator can carefully place the items in the appropriate position on the workbench. However, manual operation is relatively slow and has certain requirements on the operator's proficiency. In large-scale production scenarios with frequent in and out, the efficiency may not be as good as the workbench with automatic in and out.

2. Automatic rewinding of hot stamping film

• Rewinding principle: The hot stamping film automatic rewinding system is generally composed of a motor, a rewinding roller and a tension control device. During the hot stamping process, when part of the hot stamping film is used up, the motor drives the winding roller to rotate and automatically wind up the remaining hot stamping film. The tension control device can ensure that the tension of the hot stamping film remains stable during the winding process to avoid wrinkles or loosening of the hot stamping film.

• Importance: Automatically winding the hot stamping film can not only improve work efficiency, but also ensure the good condition of the hot stamping film for the next use. Stable tension helps to extend the service life of the hot stamping film and make the hot stamping process smoother. If the hot stamping film tension is unstable, it may cause deviations or quality degradation of the hot stamping pattern.

3. Microcomputer operation

• Parameter control function: Microcomputer operation is one of the important features of this hot stamping machine. Through the microcomputer system, the operator can accurately control various parameters in the hot stamping process, such as hot stamping temperature, pressure, hot stamping time, etc. The set values ​​and actual values ​​of these parameters can be intuitively displayed on the microcomputer display, which is convenient for the operator to adjust. For example, for hot stamping workpieces of different materials, the operator can enter the corresponding material type in the microcomputer, and the system will automatically recommend the appropriate hot stamping temperature and pressure range.

• Intelligence and convenience: The microcomputer operation also has the characteristics of intelligence. It can store a variety of hot stamping process parameters, which is convenient for users to call at any time. In addition, the microcomputer system can monitor the working status of the hot stamping machine in real time. When abnormal conditions occur (such as excessive temperature, abnormal pressure, etc.), an alarm will be issued in time to remind the operator, which improves the safety and reliability of the equipment.

4. High-pressure manual flat hot stamping machine

• Pressure system: The hot stamping machine has the characteristics of high pressure. The pressure is usually achieved by a manually operated pressure adjustment device, such as a hand wheel, a screw, etc. The operator rotates the hand wheel or adjusts the screw to make the pressure mechanism (such as a hydraulic system or a mechanical supercharger) generate a large pressure to meet the requirements of some workpieces that require high pressure to achieve a good hot stamping effect.

• Flat hot stamping applicability: Since it is a flat hot stamping machine, it is suitable for hot stamping of various flat-shaped workpieces, such as paper, plastic sheets, leather, etc. During the hot stamping process, the flat hot stamping plate can clearly and firmly stamp the pattern or text on the hot stamping film on the flat surface of the workpiece under the action of high pressure. 

Manual hot stamping Machine //Structure
Working table	Manual in-out , size: 320*400mm.
Stamping Head drive	Manual , Level keeping pressure
Foil collecting method	Motor-drive , Collecting time adjustable
Press	Vertical press
Temperature control	Heater tube, automatically controlling
Foil collecting	Automatically collecting
Press adjustment way	Up-down of working table
Manual hot stamping machine //Usage and characters
Guide	Gilding - paper, leather, wood, plastic, glass, Baked - wood products, baked painting, gift box packaging; Embossing - paper, leather, cloth. Flat-object stamping machine with large-pressure, Suitable for stamping on invitation letter, card. Leather, wooden gift, Paper package, Plastics film, Electron products; Manual. Automatic feed foil, automatic temperature controlling ensures stamping quality. Because of large pressure, It is suitable for gilding and baking Impression on leather, paper, wooden materials.
Application fields	Paper Gilding, Leather Impression, Wood ware Baking Paper Concave-convex embossing， Cloth hot stamping, Plastics Bronzing ，Glass and metal Heat transfer
Manual hot stamping Machine //Parameter
Technical parameters	HM-TC1520	HM-TC2129
	Size of Hot Plate :150×200 mm Work Table Size :320 ×400 mm Max. Pressure :4000Kg Max. Head Stroke :40mm Heater Capacity: 1200 W Foil Controller :motor Controller Temperature adjustment :0-300oC。	Size of Hot Plate :210×290 mm Work Table Size :320 ×400 mm Max. Pressure :4000Kg Max. Head Stroke :40mm Heater Capacity: 1200 W Foil Controller :motor Controller Temperature adjustment :0-300oC。
	HM-TC1927	HM-TC3025
	Size of Hot Plate :190×270 mm Work Table Size :320 ×400 mm Max. Pressure :4000Kg Max. Head Stroke :40mm Heater Capacity: 1200 W Foil Controller :motor Controller Temperature adjustment :0-300oC。	Size of Hot Plate :300×250 mm ] Work Table Size :320 ×400 mm Max. Pressure :4000Kg Max. Head Stroke :40mm Heater Capacity: 1200 W Foil Controller :motor Controller Temperature adjustment :0-300oC
Works supply	110V-220VPower supply；
Package list	Package list: 0.750 x 0.670 x 0.960 mm Gross weight: 180kg CBM: 0.4824
H.S.Code	8443198000
Certificate	CE
Manual hot stamping machine //Advantage
Function	Table can be manually pulled out for easy product to take on and off; Table can be back-front, rotate adjustment, quick easy safe operation; Table with screw height adjustment control, precision and stability; Automatic temperature control system, temperature can be set freely; Stamping time can be adjusted; Automatic Stamping foil feeding, Foil collection, foil collection time can be adjusted; Heating pipe heating systems, long life, easy to replace; Manual stamping operation, self-locking mechanism Pressing constant pressure; High-strength steel plate and cast gilt table, flatness

Application︰
The semi-automatic hot stamping machine is mainly composed of the up and down of the hot stamping head, the conveying of the hot stamping paper, etc. We mainly name the hot stamping machine based on the control method of the hot stamping head up and down. Manual hot stamping machines are the simplest type of hot stamping machine. The conveyance of the hot stamping paper and the heating of the heating plate of the manual hot stamping machine still need electricity. The manual hot stamping machine is widely used in hot stamping processing in stores and small-scale factories, and can hot stamp most products such as paper, leather, plastic, and wood.

Base structure︰
Body

The body is the basic frame of the entire manual hot stamping machine, which is used to support and fix other parts to ensure the stability of the machine. It is usually made of metal materials, such as cast iron or steel, to give it sufficient weight and strength to reduce shaking during the hot stamping operation.

Heating plate and temperature control system

The heating plate is a key component of the hot stamping machine, and a heating element, such as an electric heating tube, is installed inside. It can quickly heat up and remain within the set hot stamping temperature range to provide heat for hot stamping. The heating and constant temperature control of the heating plate are controlled by the thermostat, and the operator can set different temperatures according to the different hot stamping materials.

Pressure regulating device
The pressure is adjusted by a handle, a screw or a pneumatic device. For example, when using a screw structure, the screw is moved up and down by rotating the handle, thereby changing the distance between the heating plate and the workbench, thereby adjusting the pressure during hot stamping.

Workbench
The workbench is where the hot stamping material is placed, which can withstand a certain pressure and temperature while avoiding scratching the hot stamping material. To prevent the product from moving during the hot stamping process, the workbench may be equipped with some simple positioning devices, such as clips or magnetic devices. Clips can clamp the edges of materials such as paper and leather, while magnetic devices are suitable for some metal materials that can be magnetically attracted. Some products require special fixtures to fix the product.

Hot stamping foil conveying device
Includes unwinding structure and rewinding mechanism: used to place hot stamping foil rolls and collect used hot stamping foil. Hot stamping foil conveying device is generally controlled by micro motor.

Product Image