产品描述

    冷烫金工艺是有别于对烫金版进行加热将烫金箔上面的金属镀层转移到产品上面的热烫金工艺而言的。 它主要借助涂层，先在产品上面丝印或者喷涂溶剂型的或者UV型的光油， 然后采用辊筒式的烫金机进行压印，有涂层的区域将会转移烫金箔，而没有涂层的区域则不会转移烫金箔。
    冷烫金工艺适合较大幅面的纸张，不耐高温的薄膜，一些金属玻璃等不宜直接烫金的产品。冷烫金工艺也较适合多色烫金组合。

   H-TCR720 is designed for water transfer paper, heat transfer paper with hot stamping  such as stickers gilt of ceramic label paper, it has one set of feeding roll, installation need Stamping Foil . It is widely used in Cloth ,stickers, PVC film, paper and other products.  
Indirect stamping process: First, in gilt plasma screen above the paper or fabric , followed by then H-TCR720 Heat Transfer Machine transfer. For the indirect process, logo screen spacing depends on the spacing.  

H-TCR720 Paper foil Hot Stamping Machine//Parameters

• Size of Roller:150mm  
• Max roller width: 720 mm  
• Max pressure:100 Kg  
• Up-and down distance: 75 mm  
• Heat wattage: 4×400 W  
• Foil feed: Motor Drive  
• Temperature range: 0 - 400oC  
• Net Weight :480 Kg  
• Outer dimension:1300 x 620 x 1430 mm .
• Works supply : 110V-220V Power supply.
• Pakcage dimension:970×700×900mm;
• Gross weight: 565KG;
• CBM: 2.6111
• H.S.CODE : 8443192190
• Certificate : CE

H-TCR720 Water transfer label hot foil stamping machine //Advantage

• Table settings embossing roller, can be tightly foil paper or transfer film pressure in the paper surface;
• Rubber rollers rotating heat transfer uniformity, suitable for paper continuous stamping;
• The transfer pressure, temperature, speed can be based on different material for the flexible adjustment;
• The nose height adjustable stamping head movements can fine-tune, easy to adjust the height of the different products;
• Precise temperature control system, temperature error control in less than 3 degrees; silicone roll radiant heating, thermal efficiency of the utilization factor;
• Rubber roller embossing pressure control system, constant pressure of the transfer process, the transfer effect is more perfect.

用途和特性︰ 冷烫金工艺是有别于对烫金版进行加热将烫金箔上面的金属镀层转移到产品上面的热烫金工艺而言的。 它主要借助涂层，先在产品上面丝印或者喷涂溶剂型的或者UV型的光油， 然后采用辊筒式的烫金机进行压印，有涂层的区域将会转移烫金箔，而没有涂层的区域则不会转移烫金箔。
冷烫金工艺适合较大幅面的纸张，不耐高温的薄膜，一些金属玻璃等不宜直接烫金的产品。冷烫金工艺也较适合多色烫金组合。

产品图片